Home Services Guidelines and Best Practices
Door Opening Framing
Door Opening Framing guidelines, FAQs and unit pricing information
January 2017
Are you looking for independent, trustworthy advice about Door Opening Framing? Do you need to understand common installation options? If your project calls for Door Opening Framing work, the following guidelines and best practices will help you understand: Is a subcontractor really necessary for Door Opening Framing work? Will a permit be required? What are common problem areas? How much will Door Opening Framing labor cost? What are the important Door Opening Framing quality checks that should be included in the work requirements?
Door Opening Framing - Frequently Asked Questions
| What is a fair price for Door Opening Framing? | Costs vary with project size, job quality and time of year. For typical Door Opening Framing expect to pay between $22.88 to $45.75 per opening. Additional fees are typically charged for small projects or rush jobs. |
| Is a permit needed for Door Opening Framing work? | Design approval and/or permits from your local building authority are usually required for Door Opening Framing. Verify requirements with your local building department before any Door Opening Framing work begins. |
| Is it worth using a professional to perform Door Opening Framing work? | The operation and performance of the framing lumber may be adversely affected by inexperience or poor installation techniques. Hire service providers for Door Opening Framing carefully and be sure to tie payment milestones to appropriate quality checks (from the list below). |
| Is Door Opening Framing something that I can do myself? | The typical Door Opening Framing project can be completed by a moderately skilled do-it-yourselfer; as with any project, high quality Door Opening Framing requires attention to detail and careful planning. |
| How many days are typically required to complete the Door Opening Framing work? | This work can be completed in 1 to 2 days. |
Door Opening Framing - Options, Quality Checks and Important Details
Use the list below to document your expectations for level of detail and finish quality for Door Opening Framing. Make sure that relevant information is included in any written contracts or work orders on your project. Before any Door Opening Framing work begins, review the checklist with the service provider. Tie payments to satisfactory completion of this checklist.
- The layout, location, style and finish appearance of ALL materials used in Door Opening Framing will be approved by owner, before any work begins
- A detailed framing lumber layout - showing material placement and all joints/seams - will be reviewed and approved before work begins
- All lintel will be sized and configured to provide reliable, safe operation and full design performance of the framing lumber
- The framing lumber will be constructed so that the lines formed by diagonally opposite corners are the same length (no more than 1/8 inch difference)
- Finished framing lumber will feel uniformly solid and rigid under pressure
- The framing lumber will be solidly attached and not slide, rock, twist or move when used
- All work must meet or exceed local code requirements
Door Opening Framing - Work Milestones and Project Reminders
The following list summarizes work tasks commonly performed during Door Opening Framing. These tasks help ensure proper completion of the framing lumber work and compliance with common manufacturer and vendor warranty requirements. Make sure that either you or your service provider takes responsibility for each of these tasks. All service provider task responsiblities should be clearly called out in the written contract or work orders.
- Obtain a permit for Door Opening Framing from local building authority; post permit on the jobsite as required
- Complete written contract, including scope of work, quality checks, warranty, timing and payment terms; ensure that contract is signed before work begins
- Review and approve detailed layout / plan that shows location, orientation and placement of framing lumber, before any work begins
- Review quantity calculations for framing lumber and any associated construction materials; overage /waste should be less than 7.5% of calculated quantities
- Manage delivery of framing lumber; verify that delivered model #, grade, finish, size, options, and quantity match the order precisely; thoroughly inspect all items for damage and proper operation; make or authorize final payment only after complete order is delivered
- Store framing lumber in a secure, dry location that is fully protected from the elements prior to installation
- Confirm date (and time) for project start with subcontractor - one week and two days prior to project start
- Install framing lumber using vinyl coated framing nails, in compliance manufacturer recommendations and applicable local building code(s)
- Remove debris, dirt and dust from all work areas; unless otherwise agreed, all demolition debris and construction waste will be removed from the site within 24 hours
- Correct any permit issues; schedule and confirm final permit inspection signoff
- Inspect Door Opening Framing and verify that all quality requirements and punch list items are completed correctly
- Submit final payment in exchange for signed lien release; final payment amount should be adjusted for excess material to be returned and tasks not performed; pay with a check to ensure expense can be verified for tax purposes
