Home Services Guidelines and Best Practices
Split Face Block Installation
Split Face Block Installation guidelines, FAQs and unit pricing information
January 2017
Are you looking for independent, trustworthy advice about Split Face Block Installation? Do you need to understand common installation options? If your project calls for Split Face Block Installation work, the following guidelines and best practices will help you understand: Is a subcontractor really necessary for Split Face Block Installation work? Will a permit be required? What are common problem areas? How much will Split Face Block Installation labor cost? What are the important Split Face Block Installation quality checks that should be included in the work requirements?
Split Face Block Installation - Frequently Asked Questions
| What is a fair price for Split Face Block Installation? | Costs vary with project size, job quality and time of year. For typical Split Face Block Installation expect to pay between $5.71 to $7.04 per square foot. Additional fees are typically charged for small projects or rush jobs. |
| Is a permit needed for Split Face Block Installation work? | Design approval and/or permits from your local building authority are usually required for Split Face Block Installation. Verify requirements with your local building department before any Split Face Block Installation work begins. |
| Is it worth using a professional to perform Split Face Block Installation work? | The appearance, performance and serviceable life of the split face block will depend significantly on the skill and experience of the professional you hire. Make sure you verify the quality of past Split Face Block Installation work before hiring. Tie payment milestones to appropriate quality checks (use the list below). |
| Is Split Face Block Installation something that I can do myself? | This is not a project recommended for the do it yourselfer. A successful Split Face Block Installation requires the work of skilled trade contractors as well as special materials, tools, fabrication and installation techniques. Do it yourself mistakes may be expensive to remedy and will likely reduce the marketability and value of your home. |
| How many days are typically required to complete the Split Face Block Installation work? | This work can be completed in 2 to 5 days. |
Split Face Block Installation - Options, Quality Checks and Important Details
Use the list below to document your expectations for level of detail and finish quality for Split Face Block Installation. Make sure that relevant information is included in any written contracts or work orders on your project. Before any Split Face Block Installation work begins, review the checklist with the service provider. Tie payments to satisfactory completion of this checklist.
- The layout, location, style and finish appearance of ALL materials used in Split Face Block Installation will be approved by owner, before any work begins
- All block wall from the same manufacturers lot
- Patterned block wall seams will be installed so that patterns match to within 1/64 inch along the entire length of each seam
- Only exterior grade, weather rated split face block will be installed
- All split face block mortar joints will be of uniform thickness and depth
- All work must meet or exceed local code requirements
- Installed block wall surface variations along a 6 foot straight edge will not exceed 1/8 inch - from any location along any direction
Split Face Block Installation - Work Milestones and Project Reminders
The following list summarizes work tasks commonly performed during Split Face Block Installation. These tasks help ensure proper completion of the split face block work and compliance with common manufacturer and vendor warranty requirements. Make sure that either you or your service provider takes responsibility for each of these tasks. All service provider task responsiblities should be clearly called out in the written contract or work orders.
- Verify that planned Split Face Block Installation will comply with home owner association requirements
- Determine if permit is required for Split Face Block Installation by local building authority, before any work begins
- Complete written project plan including scope of work, quality checks, warranty, timing and payment terms; project plan should be included in contract agreement and reviewed before any work begins
- Review and approve detailed layout / plan that shows location, orientation and placement of split face block, before any work begins
- Select, specify and order split face block; verify that type, grade, finish, size, color, any options, and quantity are clearly identified in the order; make sure that delivery date, terms and damage provisions are included in the order
- Manage delivery of split face block; verify that delivered model #, grade, finish, size, options, and quantity match the order precisely; thoroughly inspect all items for damage and proper operation; make or authorize final payment only after complete order is delivered
- Review material choices for Split Face Block Installation with the homeowner before work begins - consider toxic exposure, allergic risks and environmental factors; purchase construction materials only after approval
- Obtain a permit for Split Face Block Installation from local building authority; post permit on the jobsite as required
- Carefully remove all manufacturers labels and clean the block wall surfaces - without scraping, scratching or otherwise damaging the split face block
- Remove debris, dirt and dust from all work areas; unless otherwise agreed, all demolition debris and construction waste will be removed from the site within 24 hours
- Inspect Split Face Block Installation and verify that all quality requirements and punch list items are completed correctly
- Submit final payment in exchange for signed lien release; final payment amount should be adjusted for excess material to be returned and tasks not performed; pay with a check to ensure expense can be verified for tax purposes
